Hi everyone in this post i have provided a note related to the questions and answer means MCQ for the origin and soil and clay mineralogy topic. Lots of questions are considered in the following notes. Please go through it and read all questions carefully and do practice for all questions. All questions are very important…
Estimate of Building means to calculate the quantity and identifying the cost. In this post i have prepared the online tool which provide the Building quantity and cost. You need to put the values in highlighted colors to get good approximate estimate. Before use of the following tool of building estimation watch the following video…
Hi everyone in this post you can calculate the dead load for beam which is use for building analysis and design. Self Wt of Concrete Kg/Cum Self Wt of Steel Kg/Cum Size of Column Width mm Depth mm Length m Volume of concrete Weight of concrete Kg % Of Steel weight Weight of steel Kg…
Hi everyone in this post you can estimate the column deal load which help you to provide load during the building analysis. Self Wt of Concrete Kg/Cum Self Wt of Steel Kg/Cum Size of Column Width Depth Height Volume of concrete Weight of concrete Kg % Of Steel weight Weight of steel Kg Total Weight…
Hi everyone in following provided sheet you can estimate the cost of M15 plinth level concrete.
Hi everyone welcome to Civilnotess. I am Parag Pal providing you a easy way of building cost estimation which will provide you the idea about how much cost incurred for the construction of building. If you like above sheet of calculation then kindly please subscribe my channel and comment below for more required calculations. Following…
The properties of the soil on which their classification and identification are based are known as index properties. The index properties that are used are: Grain size distribution Consistency limits Plasticity index Grain size distribution (sieve analysis)The sieves are arranged, keeping the thinner ones below and the thicker ones above. A defined amount of soil…
1. Test samples to determine the cohesion and internal friction angle.If the analysis is for a natural slope, it is essential that the sample is not disturbed. In aspects as important as the cutting application rate and the initial consolidation state, the condition of the test should represent as close as possible to the most…
When it comes to renovations, improvements or projects from scratch, the choice of construction materials will largely determine the process and quality of a project. From the base materials to the material of choice to improve a wall, ceiling or roof, we break down the five common building materials found on the site along with…
