Learn and get Best civil engineering subject wise Notes, Lectures, Excel templates and Software knowledge at one place
Complete UPV Test notes: definition, principle (V=L/T), 3 transmission modes (direct, indirect, semi-direct), IS 13311 Part 1 procedure, pulse velocity quality table (>4.5 to <2.0 km/s), factors affecting UPV (reinforcement, moisture), SONREB method, and exam FAQs.
Complete Lightweight Concrete (LWC) notes: 3 types (lightweight aggregate, aerated/AAC, no-fines), density classification table (300-1840 kg/m3), AAC block manufacturing process, thermal conductivity comparison, modulus of elasticity formula (ACI 318), IS 9142 and IS 2185, and applications.
Complete Rebound Hammer Test notes: definition, working principle (Schmidt Hammer), IS 13311 Part 2 procedure (9 readings, outlier rejection), Rebound Number vs quality table, factors affecting R (carbonation warning), angle correction table, and exam FAQs.
Complete SCC notes: definition, origin (Okamura), 3 key properties (filling, passing, segregation resistance), fresh tests (slump flow 650-800mm, V-funnel 6-12s, L-box H2/H1≥0.80, J-ring), mix proportions, EFNARC classification, production process, and applications in tunnels and precast.
Complete notes on Methods of Curing Concrete: 6 methods (water/ponding, wet covering/hessian, membrane/polythene, steam, electrical, chemical), comparison table with IS codes, steam curing cycle, DEF warning, curing compounds (IS 9954), and exam FAQs.
Complete notes on High Performance Concrete (HPC): definition, HPC vs NSC comparison table, the 5 pillars of HPC, key materials (silica fume, superplasticizer), typical mix proportions, durability tests (RCPT, sorptivity, chloride diffusion) with acceptance limits, and applications in bridges, high-rise buildings, and marine structures.
Complete grouting notes: 4 types (cement IS 9012, epoxy IS 13395, polyurethane expanding, non-shrink IS 16220), grouting procedure (drill, inject from bottom, 0.1-1.0 MPa), PT duct grouting (IS 1343, W:C≤0.44), machine foundations, and exam FAQs.
Complete jacketing notes: RC jacketing (100mm min, epoxy dowels, surface roughening 5-6mm, IS 13935), steel jacketing (plates+grout, minimal section, IS 800), FRP wrapping (CFRP/GFRP, IS 15988, negligible weight), comparison table, surface prep, exam FAQs.
Complete maintenance and rehabilitation notes: 3 types (preventive 1×, corrective 5-10×, emergency 50-100×), IS 456 Cl.17 decision sequence (core test avg≥0.85fck → load test → strengthen), rehabilitation techniques table (10 distress types), life cycle cost 1:5:50, post-repair monitoring.
Complete notes on Curing of Concrete: definition, 7 objectives, cement hydration process (C3S → C-S-H), minimum curing duration table (IS 456 Cl.13.5), strength gain vs curing age table (OPC vs PPC), effects of inadequate curing, and exam FAQs.