Concrete is a composite material made by mixing cement, sand, coarse aggregate, and water — and it’s the most widely used building material in the world. Once placed and cured, it hardens into a stone-like mass strong enough to carry heavy structural loads. Add steel reinforcement at the right locations, and you get Reinforced Cement…
The column rested on the footing tends to punch through the footing due to the shear stress that acts around the footing, the fracture forms a truncated…
A lap is when two pieces of reinforcing bar (rebar) are overlapped to create a continuous line of rebar
The slump test is the most popular because of the simplicity of the equipment required and the test procedure
WHAT ARE THE TYPES OF DEFECTS IN CONCRETE AND ITS REPAIR What Are The Post Concrete Defects
Complete guide on What Is 1.54 In Concrete & What Is 1.24 In Mortar Calculation?. Learn everything about this civil engineering topic with detailed expl…
Curing of concrete PROPORTIONING OF CONCRETE Selection of the proper quantity of cement, coarse aggregate, sand and water to obtain the desired quality …
WHAT IS THE NECESSITY & IMPORTANCE OF CONCRETE COVER In addition to integrity, strength and other design requirements, the durability of the structure d…
UNDERWATER CONCRETING “The concrete should be plastic and cohesive but should have good flowability
VARIOUS TYPES OF JOINTS 1) Construction Joints 2) Expansion Joint And Contraction Joint 3) Cold Joint CONSTRUCTION JOINTS: Construction joints occur whe…
